2015 - 2017 Chrysler 300 3.6 V6 - RIPP Supercharger System.  A projected 400 - 425 WHEEL horsepower to the ground that can be driven daily. 

Key features of this system are a Vortech V3 Self-Contained Centrifugal Supercharger, an air-to-air front-mounted intercooler, larger plug-and-play primary injectors, and a proprietary plug-and-play map sensor. Proper ECU calibrations are provided by RIPP via HP Tuners. Our system bolts on in eight to ten hours by a licensed mechanic and is considered the most complete and easy-to-install system on the market.

Preliminary tests show that an Automatic 3.6 Pentastar Chrysler 300 produces only 255** rear wheel HP (WHP) in stock form. With a RIPP Supercharger installed we safely squeezed 425WHP+ and 360ft/lbs** of Torque on a factory 3.6 Pentastar. That WHP is higher than a 5.7 V8 Engine swap, costing thousands more and more, which is inline with a 6.4 Hemi. Additionally, clients have reported an MPG increase of 1- 4mpg combined with City/hwy***. 

RIPP has spent an enormous amount of time testing for better drive quality. we've tested in all conditions including high altitude, hot dry deserts and cold wet climates. No other manufacturer has spent more time developing a bolt-on supercharger than RIPP and it is a brand people can rely on World Wide. 

 2015-2016 C.A.R.B. certified: D-705-1

Please Review Important CARB Information Before Purchasing (click here)

Heritage Edition Option:

Looking for the traditional supercharger whine? Here it is. The Heritage Edition Vortech V-3 Supercharger makes the classic new again with it's V-1 Straight Cut Gear Set. This gear set is much louder than the helical cut gear set in the standard V-3 supercharger. Check out the video below to hear it!

• Product update note: As of 9.2.23 This Supercharger kit will now include new and improved, state of the art, fuel injectors. This injector is called "SP"
• If you have an older supercharger kit purchased before 9.2.23 it will use the "H" injector. PLESE REFERENCE THIS DETAIL WITH ANY COMMUNICATION WITH RIPP. All Fuel injectors are manufactured by Fuel Injector Clinic (FIC)

 *Horse Power Measured at the Rear wheel (not crank)

 ** All RIPP WHP levels are measured at the rear wheel, not at the crank. Be careful when comparing HP to WHP. WHP levels vary depending on tire and gear combination as rotational mass comes into play, this affects both Naturally Aspirated (NA) and Forced Induction (FI) total output.

 ***Although the tune included with this system is calibrated for your vehicle the user is responsible for any further Dyno tuning to refine the calibration to their liking. The tune should be considered standard. The user should look forward to  proper Dyno if necessary. 

*** RIPP is not responsible for tuning or discrepancies between different dyno readings. Many Dynometers read in different net output depending on manufacture, style, elevation, and temperature. RIPP advertises SAE HP captured at the wheel instead of at the crank for the most realistic scenario as possible.  0-60 times and quarter mile times may vary based on driving style and other variable out of our control.